02. Connection Mode Selection
Use a data-capable USB cable to connect the keyboard in wired mode.
03. Wireless Device Connection
FN + 1 / 2 / 3 / 4 Bluetooth device 1 / Bluetooth device 2 / Bluetooth device 3 / 2.4G
Press briefly to switch devices, or hold for 3 seconds to enter pairing mode. For 2.4G, press FN + 4 before connecting the included receiver to your computer.
How do I pair Air75 V3 or Node75 over Bluetooth?
Channels 1–3 each hold one Bluetooth device, and channel 4 is reserved for the 2.4G receiver.
- FN + 1 / 2 / 3 Press briefly to switch device. Hold until the blue left-side indicator flashes quickly to enter pairing mode.
- Open Bluetooth settings on your computer, tablet or phone and select the NuPhy keyboard entry.
- FN + 4 Switch to the 2.4G receiver, then plug the receiver into a USB-A port away from metal hubs and USB 3.0 devices.
If the keyboard does not show up, remove the old Bluetooth record, keep the keyboard close to the device and repeat the first step.
Left-side RGB
Right-side RGB
System mode indicator
75% ANSI keyboard diagram for Air75 V2, Air75 V3 and Air96 V2 (sections 01–09)
04. Keyboard Backlight Settings
FN + ↑ / ↓ Increase or decrease backlight brightness
FN + ← Switch the backlight effect
FN + → Switch the backlight color
FN + < / > Decrease or increase backlight speed
How to change, dim or turn off the backlight
The lighting is controlled with the arrow keys, so no software or driver is needed.
- FN + ↑ / ↓ Increase or decrease backlight brightness
- FN + ← Switch the backlight effect
- FN + → Switch the backlight colour
- FN + < / > Decrease or increase backlight speed
To stop the lighting while the keyboard is idle, turn sleep mode on with FN + ]; the lighting switches off once the keyboard stops receiving input.
05. Sidelight Settings
FN + M + ↑ / ↓ Increase or decrease sidelight brightness
FN + M + ← Switch the sidelight effect
FN + M + → Switch the sidelight color
FN + M + < / > Decrease or increase sidelight speed
06. Sleep Mode Settings
FN + ] Turn sleep mode on or off
After 6 minutes without input, the lighting turns off and the keyboard enters sleep mode.
07. Screenshot Shortcuts
Screenshot key (Mac) Capture a selected area
FN + Screenshot key (Mac) Capture the full screen
Screenshot key (Win) Capture the full screen
08. Other Key Combinations
FN + \ Turn the persistent battery-level display on or off
How to check the battery level
The right-side indicator reports the charge level while the keyboard is awake.
- FN + \ Toggle the persistent battery-level display on or off
- Read the right-side indicator: green for 96–100%, orange for 11–95% and red for 1–10%.
Air75 V3 uses a 4000mAh battery; NuPhy laboratory data lists 60–100 hours with all lights on and up to 1200 hours with RGB off.
09. Factory Reset
FN + [ Hold for 3 seconds to restore factory settings.
How to factory reset Air75 V3
A factory reset clears the settings stored on the keyboard.
- FN + [ Hold for 3 seconds to restore factory settings
- Pair each Bluetooth channel again and reapply any lighting or key settings.
The same FN + [ reset applies to Air75 V2 and Air96 V2; Node75 follows its own manual. A reset does not update firmware.
13. Configuration Tools and Firmware
Use the tool assigned to your exact model. Check the official manual center before changing firmware.
VIA models
Use VIA for Air60 V2, Air75 V2 and Air96 V2.
Open VIA through NuPhy ConsoleNuPhyIO models
Use NuPhyIO for Air60 HE, Air75 V3, Node75 and Node100.
Open NuPhyIOFirmware
Use the official manual center to select Node75, Node100 and other models by LP/HP and ANSI, ISO or JIS layout.
Open the official firmware entry, then select the exact model and layout. Flashing steps are intentionally left to the official instructions.
Frequently Asked Questions
How do I identify which model instructions apply?
Check the exact model name and layout printed on the keyboard or packaging. Sections 01–09 apply to Air75 V2, Air75 V3 and Air96 V2. For Node75 only sections 01–03 apply, so use the Node75 manual for sleep, lighting and reset.
Should I use VIA or NuPhyIO?
Use VIA for Air60 V2, Air75 V2 and Air96 V2. Use NuPhyIO for Air60 HE, Air75 V3, Node75 and Node100.
How do I pair Bluetooth or 2.4G?
Follow the matching model instructions, then hold its model-specific channel key until the relevant indicator flashes quickly. The channel keys differ by model.
What should I do if a wireless connection is unstable?
Remove the old Bluetooth record and pair again. Keep the 2.4G receiver away from metal hubs, USB 3.0 devices and other transmitters.
What should I know about Air75 V3 battery life and charging?
Laboratory data rates the 4000mAh battery at 60–100 hours with all lights on and up to 1200 hours with RGB off. The official manual recommends a 5V/1A charger; turn lighting off for longer wireless use.
How can I update firmware safely?
Open the official firmware page and follow its latest instructions for selecting the exact model and layout.
Which ANSI, ISO, JIS, Node75 or Node100 manual should I use?
Confirm LP or HP first, then choose the manual matching the ANSI, ISO or JIS layout. The local Node75 PDF covers Low-Profile only; use the official manual center for Node75 HP and Node100.
How do I change or turn off the backlight?
Use FN plus the Up and Down arrows to change brightness, FN plus Left and Right to change the effect and color, and FN plus the comma and period keys to change speed. To stop the lighting while the keyboard is idle, turn sleep mode on with FN plus the right bracket key.
How do I check the battery level?
Press FN plus the backslash key to toggle the persistent battery display, then read the right-side indicator: green for 96 to 100 percent, orange for 11 to 95 percent and red for 1 to 10 percent.
How do I factory reset Air75 V3?
Hold FN plus the left bracket key for 3 seconds to restore factory settings, then pair each Bluetooth channel again. Air75 V2 and Air96 V2 use the same shortcut; Node75 follows its own manual.